Yokogawa EJA115 - Manual (Page 2)

(2)
Please use the following information in place of the corresponding part of the table on the applicable page.
CSA Explosionproof Approval * 5
Certificate: 1010820
Explosionproof for Class I, Division 1, Groups B, C and D
Dustignitionproof for Class II/III, Division 1, Groups E, F and G
Temp. Class: T4, T5, T6 Encl Type 4x Amb. Temp.: –40 to 80
°
C (–40 to 176
°
F)
Max. Process Temp.: T4; 120
°
C (248
°
F), T5; 100
°
C (212
°
F), T6; 85
°
C (185
°
F)
Electrical connection: 1/2 NPT female *1
Process Sealing Certification
Dual Seal Certified by CSA to the requirement of ANSI/ISA 12.27.01
No additional sealing required
Primary seal failure annunciation: at the zero adjustment screw
CF15
Canadian Standards
Association (CSA)
(3)
Please use the following information in place of the corresponding part of the table on the applicable page.
CF15
CSA Explosionproof Approval * 1
Certificate: 1010820
Explosionproof for Class I, Division 1, Groups B, C and D
Dustignitionproof for Class II/III, Division 1, Groups E, F and G
Temp. Class: T4, T5, T6 Encl Type 4x Amb. Temp.: –40 to 80
°
C (–40 to 176
°
F)
Max. Process Temp.: T4; 120 ° C (248 ° F), T5; 100 ° C (212 ° F), T6; 85 ° C (185 ° F)
Process Sealing Certification
Dual Seal Certified by CSA to the requirement of ANSI/ISA 12.27.01
No additional sealing required
Primary seal failure annunciation: at the zero adjustment screw
Canadian Standards
Association (CSA)