En g l is h english – Pfister VTP-E30W User Manual

Page 3

ENGLISH

ENGLISH

8 WAX SEAL INSTALLATION

Carefully turn

Toilet’s Base (8A)

on it’s side on top of a Secure Padded Surface (8B).

Place Wax Seal (8C) fi rmly into the outlet of the toilet bowl.

10 WATER SUPPLY CONNECTION

Use FTFE plumbers tape on threaded fi ttings according to manufacturer’s instructions.
Attach Large Hose Nut (10C) to Fill Valve Shank (10D) located on rear of Toilet Bowl.
Connect Short Hose Nut (10A) onto Water Supply Valve (10B). Turn on Water Supply
Valve (10B) by turning Handle (10E) counterclockwise.

11 INTERNAL PLUMBING

Tank comes pre-installed with fl ushing mechanism. (Some adjustments may be
necessary).

12 UNIT START UP

Turn on Main Water Supply Valve and check for leaks.

13 TANK LID INSTALLATION

Place Tank Lid (14A) on top of Tank (14B). Be sure Lid Lip (14C) covers the top of
Tank (14B).

9 TOILET BOWL INSTALLATION

A. Place

Toilet’s Base

(9A) onto Waste Outlet Hole (9B) with Tee Bolts (9C) passing

through Fixing Holes (9D).
B.

Place Plastic Washer (9E) and Metal Washer (9F)

onto Tee Bolts

(9C). Secure by

tightening the Mounting Nuts (9G) on to the

Tee

Bolts.

Do not over tighten!
Snap on Plastic Caps (9H) over bolts and nut as shown.

10D

10A

10B

10E

10C

OPEN

13A

13B

13C