English, Faucet installation – Pfister F-042-SYKK User Manual

Page 2

ENGLISH

ENGLISH

FAUCET INSTALLATION

Thank you for purchasing this Price Pﬁster product. All Price Pﬁster products are
carefully engineered, and factory tested to provide long trouble-free use under normal
conditions. This product is easy to install using basic tools and our easy to follow
illustrated instructions. If you have any questions regarding this product, call 1-800-
Pfaucet (1-800-732-8238).

1 BEFORE PROCEEDING

WARNING: Read all the instructions completely before proceeding. Price Pﬁster

recommends calling a professional if you are uncertain about installing this product!
This product should be installed in accordance with all local and state plumbing and
building codes.

2 SHUT OFF WATER SUPPLY

Locate water supply inlets and shut off the water supply valves. These are usually found
under the sink or near the water meter. If you are replacing an existing faucet, remove
the old faucet from the sink and clean the sink surface thoroughly.

3 TOOLS RECOMMENDED

• Plumber's putty

• Slotted screwdriver

• Adjustable wrench

• Pliers

• Flashlight

• Cloth

Your installation may require new supply lines and / or shut-off valves or other additional
tools.

4 CHECKING THE CONTENTS OF THE BOX

Upon opening the box, check to ensure that all of the following items are included.

A Spout Body

B Pop-Up Assembly

C Pop-Up Rod

D Long Nut

E Mounting Washer

F Seal Base

G Deckplate

H Putty Plate

If any of these items are missing, please contact Price Pﬁster Consumer Service at
1-800-Pfaucet (1-800-732-8238).

5 INSTALLING FAUCET WITH SINGLE HOLE MOUNTING

Place a bead of plumber’s putty in the groove along the bottom outer edge of Base Plate
(5A). Place Base Plate (5A) under base of Spout Body (5B). From above sink, insert
Threaded Shank (5C) and Supply Tubes (5D) through hole (5E) on sink.

6 INSTALLING FAUCET WITH DECKPLATE

Ensure that the Plastic Putty Plate (6A) is pressed on the Deckplate (6B). Place a bead
of plumber’s putty in the groove along the outer edge of the Putty Plate (6A). Assemble
Deckplate (6B) and Putty Plate (6A) to Spout Base (6C). With spout facing forward,
carefully install the Faucet Supply Hoses (6D) through the Center Hole of sink (6E).

BOTTOM GROOVE