ATEN ATEN MasterView CS-1774 - Manual (Page 25)

Keyboard Operating Platform
The CS-1772 / CS-1774’s default port configuration is for a PC Compatible keyboard
operating platform. If your requirements call for different port settings (you have a
Mac or Sun attached to a port, e.g.), you can change a port’s keyboard operating
platform configuration as follows:
1. Bring the KVM focus to the port you want to set.
2. Invoke HSM (see p. 17)
3. Press and release the appropriate Function key (see table). After completing a
setting, you automatically exit HSM.
Function Key Operation
[F2] Sets the Mac keyboard operating platform.
[F3] Sets the Sun keyboard operating platform.
[F10] Auto detects the keyboard operating platform (for PC compatible systems).
Activates Pass Through keyboard mode (keystrokes are sent directly to the
computer instead of through the Mac or Sun emulator).
* The first time that the Sun system runs from a port, you must configure its port for
the Sun keyboard operating platform before you turn the system on, or else the Sun
system will not start.
2005-03-16
Hotkey Setting Mode
19