Pfister GT49-FE0K - Manual (Page 4)

EN
G
LI
SH
EN
G
LI
SH
ENGLISH
11
12
19701 DaVinci
Lake Forest, CA 92610
Phone: 1-800-Pfaucet
www.pricepfi ster.com
11 EXTENSION CONDITION
If deck thickness is between 1 1 /
2
// ” to 2 1 /
16
// ” then use Extension Spacers (11A) and
Thrust Washer ( Thrust Washer Thrust Washer 11B). From underneath sink, place Extension Spacers (11A) and Square
Washer (11C) onto Valve Shank (11D) and tighten using Mounting Nut (11E). Place
Thrust Washer (11B) Mounting Washer (11F) onto Spout Shank (11G) and hand tighten
with Mounting Nut (11H). Align Lift Rod (11J) with slot in Mounting Washer (11F). Be
sure Spout (11K) is centered and facing forward and tighten the Mounting Nut (11H)
until Spout (11K) is fi rmly secured to sink.
12 HOSE CONNECTION TO SPOUT BODY
From underneath sink, install hose. Refer to original 49 Series installation
instructions.
Proceed with all other faucet installations.
CAUTION: Maintenance
DISASSEMBLY
1. Replacement parts may be available at the store where you purchased
your faucet.
2. When replacement parts are not available, please write or call Price
Pfi ster Consumer Service.
3. Always turn off water and relieve pressure before working on your
faucet.
1–800–PFAUCET (1–800–732–8238)
For Toll-Free Pfaucet information call
1–800–PFAUCET (1–800–732–8238)
or visit www.pricepfi ster.com
• Installation Support
• Care and Warranty Information
4
11D
11A
11C
11E
11D
11A
11C
11E 11F
11B
11H
11G
11B
11A
11A
11J
11K
11K
1 1 / 2 ” TO 2 1 / 16 ”