En g li sh en g li sh – Pfister GT49-FE0K User Manual

Page 2

ENGLISH

Thank you for purchasing this Price Pﬁ ster product. All Price Pﬁ ster products are carefully engineered, and factory tested to

provide long trouble-free use under normal conditions. This product is easy to install using basic tools and our easy to follow

illustrated instructions. If you have any questions regarding this product, call 1-800-Pfaucet (1-800-732-8238).

1 BEFORE PROCEEDING

WARNING: Read all the instructions completely before proceeding. Price Pﬁ ster

recommends calling a professional if you are uncertain about installing this product!

This product should be installed in accordance with all local and state plumbing and

building codes.

WARNING: This product has been designed for use with the Price Pﬁ ster 49 series

lavatory widespread faucet. It will not work with any other product. Please review the

Price Pﬁ ster 49 series installation instructions before installing this product.

2 SHUT OFF WATER SUPPLY

Locate water supply inlets and shut off the water supply valves. These are usually found

under the sink or near the water meter.

3 TOOLS RECOMMENDED

• Plumber's putty

• PTFE Plumber's Tape

• Slotted screwdriver

• Phillips head screwdriver •

• Phillips head screwdriver

Adjustable wrench

• Flashlight

• Cloth

Your installation may require new supply lines and / or shut-off valves or other additional

tools.

4 CHECKING THE CONTENTS OF THE BOX

Upon opening the box, check to ensure that all of the following items are included.

A Shank Extension

B Thrust Washer

C Adapter Extension (2x)

D Adapter Ring (2x)

E Screw Adapter (2x)

F Extension Spacers (2x)

G Stem Extension (2x)

H Set Screw (4X)

J Hex wrench (

33 32

// ”)

K Plastic Washer (2X)

If any of these items are missing, please contact Price Pﬁ ster Consumer Service at

1-800-Pfaucet (1-800-732-8238).

5 SPOUT PREPARATION

CAUTION: When using spout conﬁ guration as shown, use Shank Extension (5A)

and follow steps 6 & 7, other wise skip to step 8.

(Model Portland 49-P is shown) Thread Shank Inlet (5A) into Spout Shank (5B).

6 SPOUT INSTALLATION

Carefully install Spout Body (6A

66 ) through the Center Hole (6B) of sink. Refer to original

49 Series installation instructions.

Use this Extension Kit if deck thickness exceeds 1 1/2".

Minimum Hole Size 1 /

// ” Dia.