Pfister GT526-TMS - Manual (Page 4)

E
N
G
L
IS
H
ENGLISH
ENGLISH
FAUCET FUNCTIONS
11
12
13
14
15
16
11 SOAP DISPENSER INSTALLATION
From above sink, insert threaded Shank (11A) of soap dispenser body through Foam
Gasket (11B) and sink hole. From below sink, tighten Nut (11C) and thread on Bottle
(11D) to Shank (11A).
12 SOAP DISPENSER HEAD INSTALLATION
Pour in liquid soap (not included) into the Shank Orifi ce (12A). Insert Pump Mechanism
(12B) into Soap Dispenser Body (12C). Install Dispenser Head (12D) by pushing fi rmly
onto Pump Mechanism (12B).
13 WATER SUPPLY CONNECTIONS
Connect water Supply Lines (13A) to Faucet Inlets (13B). Hot water supply line goes
to hot inlet fi tting indicated by red tag (13C). (Supply lines not included). Follow
manufacturer’s instructions when installing supply lines.
14 UNIT START UP
Turn on hot and cold water supplies, and check for leaks above and below the sink
15 SPOUT FUNCTION
The Spout (15A) can be rotated around the Faucet Body in any direction.
16 VALVE FUNCTION
By lifting the Lever Handle (16A) up, the valve will be activated allowing water to fl ow.
The water fl ow will increase by continuing to lift up the Lever Handle (16A). By rotating
the Lever Handle (16A) counterclockwise, the water temperature will decreased to
fully cold. By rotating the Lever Handle (16A) clockwise, the water temperature will
increased to fully hot.
Note: Flush faucet before turning on valve (see step 21).
4
HOT COLD
11A
13A
12D
15A
16A
11B
11C
11D
12B
12A
12C
13A
13B 13B
13C
HOT COLD
ON
16A