Rear cover, Options – Proface FP3900 - 19 Flat Panel" User Manual
Page 4

-4-
Rear Cover
The Rear Cover can be used in combination with the separately sold
Desktop Stand, the Wall Mount Adaptor, or a commercially available
arm. The combinations are shown below.
• Desk Mount
requires Rear Cover (CA1-RCVLRG-01) and Desktop Stand
(CA1-STDLRG-01)
• Wall Mount
requires Rear Cover (CA1-RCVLRG-01) and Wall Mount
Adaptor (CA1-WMALRG-01)
• Arm Mount
requires Rear Cover (CA1-RCVLRG-01) and commercially
available VESA FPMPMI compliant arm.
The Rear Cover can be connected with a commercially avail-
able VESA FPMPMI compliant arm type fixture or wall mount
fixture. (Arm mounting plate dimensions: 75mm x 75mm)
VESA: Video Electronics Standard Association
FPMPMI: Flat Panel Monitor Physical Mounting Interface
(Specifications for attaching a liquid crystal display or similar
device to a VESA compliant arm or stand stipulated)
Wall Mount Adaptor (Model No. CA1-WMALRG-01)
Unit Rear Face Plate : 1
Unit Rear Face Attachment
Screws: 4
Wall Mount Adaptor Plate : 1
Wall Mount Adaptor
Attachment Screws: 2
Desktop Stand : 1
Desktop Stand (Model No. CA1-STDLRG-01)
Display Attachment Screws : 4
Options
Installation Guide : 1