Proface APL3000B - Node Box PC - Manual (Page 50)

Chapter 3 Installation and Wiring
3-7
3.2.1 Removal/Attachment the Rear Cover
„ For PS-3710A Series
Unscrew the five (5) attachment screws used to hold the Rear Cover in place, and remove the Rear Cover. The
torque of the rear cover required for these screws is 0.5 to 0.6 N • m.
3.2.2 PS-A Internal View
„ PS-3710A Series
• Use a screwdriver to loosen or tighten the screws. Be sure not to tighten screws
too tightly, since it may damage the unit.
• Be careful when removing or inserting any screws that they do not fall inside the
PS-A.
FD Drive
DVD-ROM Drive
PCMCIA Slot
(2 ports)
HDD Unit
Main Memory Installation Area (2)