Proface APL3000B - Node Box PC - Manual (Page 18)

Chapter 1 Overview
1-5
K: USB Interface (USB)
4 ports. Complies with USB 2.0.
Uses a “TYPE-A” connector.
L: Ethernet Interface (LAN1)
10BASE-T/100BASE-TX Auto Changeover.
This interface uses an RJ-45 type modular jack
connector (8 pins).
M: Ethernet Interface (LAN2)
10BASE-T/100BASE-TX/1000BASE-T Auto
Changeover. This interface uses an RJ-45 type
modular jack connector (8 pins).
N: Expansion unit Interface
1 port. Used to attach the PCI Unit.
O: Serial Interface (COM1)
D-Sub 9-pin plug type. RS-232C, RI/+5V
Changeover.
P: Serial Interface (COM2)
D-Sub 9-pin plug type.
RS-232C, RI/+5V Changeover.
Q: Serial Interface (COM3)
D-Sub 9-pin plug type.
RS-232C, RS-422, RS-485 Changeover.
R: Serial Interface (COM4)
D-Sub 9-pin plug type. RS-232C.
Changes the Touch Panel communication method.
(Serial <---> USB)
S: Line Input Interface (LINE IN)
1 port. (standard type AUDIO jack)
T: Speaker Output Interface (SPEAKER OUT)
1 port. (standard type AUDIO jack)
U: Mike Input Interface (MIC IN)
1 port. (standard type AUDIO jack)
Power supply voltage 5V DC ±5%
Output current 500mA (max.)
The maximum
communication distance
5m
U
S
Y
W
X
Bottom
R V
O Q
P T
N M
K
L