Wiegmann WA-FSN43PT Series User Manual
Page 22
![background image](/manuals/358770/22/background.png)
N 4 S - F S S E R I E S E N C L O S U R E S
N E M A 4 S I N G L E D O O R F R E E S TA N D I N G
D22
F E AT U R E S - S P E C I F I C AT I O N S
Applications
Designed to house electrical and
electronic controls, terminals, and
instruments in areas that are regularly
hosed down or are otherwise very wet.
Also suitable for outdoor applications.
Construction
• Bodies and doors fabricated from
12 gauge steel
• Continuously welded seams ground
smooth, less knockouts or holes
• “Uni-strut” mounting channels are
welded horizontally to interior body
sides, top, bottom and center
• Optional swing, half, full and rack
panels can be mounted anywhere
along “uni-strut” channel
Industry Standards
UL 508, Types 3, 4 & 12
CSA Certified, Type 3, 4 & 12
NEMA/EEMAC Types 3, 4 & 12
UL File E64791
CSA File LL66078
www.hubbell-wiegmann.com
Data Subject To Change Without Notice
• Rolled lip around three sides of
door and along top of enclosures
opening excludes liquids and cont-
aminants from entering
• Quick and easy to operate stainless
steel door clamps around three
sides of doors
• Heavy gauge continuous hinge with
stainless steel hinge pin
• Doors are removable by pulling
stainless steel continuous hinge pin
• Hasp and staple are provided for
padlocking
• Print pocket is provided
• Heavy duty removable lifting eyes
CATALOG
BODY/DOOR
ENCLOSURE SIZE
Y
BACK PANELS*
NUMBER
STEEL GAUGE
H X W X D
N 4 S 7 2 2 5 1 8 F S
12/12
72.12x25.12x18.12
6.38
(1832x638x460)
(162)
N 4 S 7 2 3 1 2 4 F S
12/12
72.12x31.12x24.12
8.38
(1832x790x613)
(213)
N 4 S 7 2 3 7 2 4 F S
12/12
72.12x37.12x24.12
10.38
(1832x943x613)
(264)
N 4 S - F S S E R I E S S I N G L E D O O R E N C L O S U R E S
See pages C30-C32
& I8-I13
*Back panels must be ordered separately.
N4S723724FS
• Doors are sealed with poured in
place polyurethane gasket
• Grounding provisions provided
Finish
• ANSI-61 gray polyester powder
inside and out
• Optional back panels are white
polyester powder
Accessories
• Back panels (reference tables)
• See pages J1-J22