Ross Controls RIGHT ANGLE - Manual (Page 14)

14 © 2012, ROSS CONTROLS. All Rights Reserved.
Right-Angle EEZ-ON ® Valves
EEZ-ON ® Valves are used to gradually apply air pressure downstream when supply is initially
applied. Select the model you need to operate with supply pressure at either port 1 or port 2.
Right-angle design with Banjo for easy positioning of pipe or tubing.
STANDARD SPECIFICATIONS: For valves on this page.
Ambient/Media Temperature: 15° to 160°F (-10° to 70°C).
Flow Media: Filtered air; 5 micron recommended.
Operating Pressure: 45 to 150 psig (3.1 to 10.3 bar).
A
B
Slot
Adjustment
Port 2
Port 1
A
B
Slot
Adjustment
Port 2
Port 1
Threaded Banjo
Push-to-Connect Fitting
1
2
Primary Pressure at port 1
1
2
Primary Pressure at port 2
Models with Threaded Banjo
Valve Model Numbers Dimensions Tightening
Port Size Primary Pressure Avg. inches (mm) Torque Max.
Port 1* Port 2** At Port 1 At Port 2 C
V
A B Ft-lb (Nm)
1/8 1/8 1969A1010 1969A1011 0.7 0.5 (13) 2.3 (57) 11.06 (15)
1/4 1/4 1969A2010 1969A2011 1.1 0.7 (17) 2.5 (63) 14.75 (20)
3/8 3/8 1969A3010 1969A3011 1.9 0.9 (22) 2.5 (63) 22.13 (30)
1/2 1/2 1969A4010 1969A4011 2.2 1.1 (27) 2.9 (74) 29.50 (40)
G1/8 G1/8 D1969A1010 D1969A1011 0.7 0.5 (13) 2.3 (57) 7.38 (10)
G1/4 G1/4 D1969A2010 D1969A2011 1.1 0.7 (17) 2.4 (61) 8.85 (12)
G3/8 G3/8 D1969A3010 D1969A3011 1.9 0.9 (22) 2.7 (67) 14.75 (20)
G1/2 G1/2 D1969A4010 D1969A4011 2.2 1.1 (27) 2.9 (72) 22.13 (30)
* Threads in port 1 are female.
** Port 2 threads are male.
Models with Push-to-Connect Fitting
Port Size Valve Model Numbers Dimensions Tightening
Port 1 # Port 2** Primary Pressure Avg. inches (mm) Torque Max.
(tube size) (thread size) At Port 1 At Port 2 C
V
A B Ft-lb (Nm)
5/32” 1/8 1969A1020 1969A1021 0.5 0.5 (13) 2.3 (57) 11.06 (15)
1/4” 1/8 1969A1030 1969A1031 0.5 0.5 (13) 2.3 (57) 11.06 (15)
1/4” 1/4 1969A2020 1969A2021 0.6 0.7 (17) 2.5 (63) 14.75 (20)
3/8” 1/4 1969A2030 1969A2031 0.6 0.7 (17) 2.5 (63) 14.75 (20)
3/8” 3/8 1969A3020 1969A3021 1.5 0.9 (22) 2.8 (69) 22.13 (30)
4 mm G1/8 D1969A1020 D1969A1021 0.5 0.5 (13) 2.3 (57) 7.38 (10)
6 mm G1/8 D1969A1030 D1969A1031 0.5 0.5 (13) 2.3 (57) 7.38 (10)
8 mm G1/8 D1969A1040 D1969A1041 0.5 0.5 (13) 2.3 (57) 7.38 (10)
6 mm G1/4 D1969A2020 D1969A2021 0.6 0.7 (17) 2.4 (61) 8.85 (12)
8 mm G1/4 D1969A2030 D1969A2031 0.6 0.7 (17) 2.4 (61) 8.85 (12)
10 mm G1/4 D1969A2040 D1969A2041 0.6 0.7 (17) 2.4 (61) 8.85 (12)
8 mm G3/8 D1969A3020 D1969A3021 1.5 0.9 (22) 2.7 (67) 14.75 (20)
10 mm G3/8 D1969A3030 D1969A3031 1.5 0.9 (22) 2.7 (67) 14.75 (20)
# Port 1 tubing size in inches (”) or millimeters (mm).
** Port 2 threads are male.
Port Mounted 2-way Normally Closed EEZ-ON ®