Val-Matic Tilted Disc Check Valve - Manual (Page 16)

15
OPTIONAL BYPASS PIPING
DESCRIPTION: Bypass piping can be factory
installed on one or both sides of the valve as shown
in Figure 10. The bypass piping include a ball valve
so that water can be allowed to flow past the closed
check valve to drain the downstream piping or wash
the pump suction piping or screens. The bypass ball
valves should normally be kept in the closed
position.
Figure 10. TDCV Bypass Piping
PARTS AND SERVICE
Parts and service are available from your local
representative or the factory. Make note of the
Valve Size and Model Number located on the valve
nameplate and contact:
Val-Matic Valve and Manufacturing Corp.
905 Riverside Drive
Elmhurst, IL 60126
Phone: (630) 941-7600
Fax: (630) 941-8042
www.valmatic.com
A sales representative will quote prices for parts or
arrange for service as needed.