Actiontec electronic Wireless DSL Gateway GT704WG-QW04 - Manual (Page 40)

36
Actiontec DSL Gateway User Manual
37
Chapter 4 Configuring Advanced Settings
Services Blocking
Selecting Services Blocking in the “Advanced Settings” screen generates the
“Services Blocking” screen.
To modify Internet privileges (Web, FTP , Newsgroups, etc.) for the computers on
the network:
1. Enter the computer’s IP address in the IP Address: text box.
2. Select the Internet service(s) to be blocked.
3. Click Add to enter the computer’s IP address in the “Blocked IP Address List”
text box.
4. To remove blocked services, select the computer’s IP address in the “Blocked IP
Address List” text box and click Remove.
Netmeeting
If a computer on the network uses Netmeeting, enable Netmeeting, by clicking the
circle next to “On” and entering the IP address of the computer. Click Next, then
click Save and Restart to apply the settings. If Netmeeting is not needed, click the
circle next to “Off.”

Note: Netmeeting is used for NAT /Private IP addressing only. If
the computer is configured for Unnumbered Mode and has a
public
IP address, Netmeeting does not have to be enabled.