Actiontec electronic Wireless DSL Gateway GT704WG-QW04 - Manual (Page 24)

20
Actiontec DSL Gateway User Manual
21
Chapter 3 Setting Up Static IP
9. In the “ DHCP Server Configuration” screen, select “Static” from the
“ DNS ” options near the center of the screen, then enter the DNS Server IP
addresses assigned by the ISP in the appropriate text boxes.

Note: If the ISP did not provide static DNS addresses, leave the DNS
option at “Dynamic.” Also, if the DHCP
server option is turned
off, this screen will not appear. The Gateway will obtain
dynamically assigned
DNS
addresses if supported by the
ISP
with static
IP
addresses.
10. Click “Save and Restart” from the menu on the left side.
11. The “Save and Restart” page appears. Click “Save and Restart” to save the set-
tings changed in the Actiontec DSL Gateway Setup Page screen.
12. Once the Gateway restarts, return to the Setup/Configuration screen and
select Change Admin Password from the menu on the left side.