Actiontec electronic Wireless DSL Gateway GT704WG-QW04 - Manual (Page 38)

34
Actiontec DSL Gateway User Manual
35
Chapter 4 Configuring Advanced Settings
802.11b/g Mode
Access to the Gateway’s network can be restricted to wireless clients using either
the
802.11 b or 802.11 g wireless adapters. Click on the down arrow next to the text
box and select the desired option. Actiontec recommends using the “Mixed” mode
(the default option), which enables both
802.11 b and 802.11 g wireless clients to join
the network.
After changing settings, click Next or Back to continue, or Save and Restart to
make all changes permanent.
DHCP Server
Selecting DHCP Server in the “Advanced Settings” screen generates the “ DHCP
Server” screen. The Gateway has a built-in DHCP (Dynamic Host Configuration
Protocol) server that automatically assigns a different IP address to each computer
on the network, eliminating IP address conflicts.
The factory default setting is On. To disable the DHCP Server, select Off.
Actiontec strongly recommends leaving the DHCP Server option On. If the DHCP
Server option is Off, ensure the IP addresses of the networked computers are
on the same subnet as the IP address of the Gateway. For more information, see
“ DHCP Server Configuration.”