Rapid-Air SERVO FEED: 100C, 100D series - Manual (Page 19)

The Pacific Scientific drive has a list
of internal faults and displays the
number of that fault on it’s readout
located on the front of the drive.
Rapid Air now displays the fault on
the keypad display. If a fault occurs
the screen will display the number
and the name of the fault, but
there will not be an explanation
TROUblEShOOTING
Servo Fault Display
accompanying the fault. This is a tool
to help you to troubleshoot if the servo
fails to perform when commanded.
If a fault was displayed the servo con-
troller will have to be turned off and re-
started to clear the fault. If the fault is
still present when the Pacific Scientific
unit is restarted, the fault may not be
displayed on the keypad screen as the
fault will not let the internal program
restart. The control panel will have to
be opened to view the fault again.
A list of probable faults and some
explanation is included in this section.
If more help is required, then Rapid
Air will have to be contacted.