Ramsey Winch FORD GRILL GUARD KIT 295342 - Manual (Page 6)

STEP 2
5
Remove bumper bracket bolts from bumper (4) each side. This allows bumper to move forward to
provide access to lower bracket bolts. Use (2) 1/2-13NC x 1-1/2 lg. capscrews with lockwashers
through bottom of vehicle frame and into nut plate attached to bracket assemblies, each side.
Tighten all hardware to full torque.
Reattach bumper to bumper brackets and tighten to full torque. Drill (2) 9/16 dia. holes through
bumper brackets, as shown below. Use bracket assembly (item #5&6) as a template. Install (2) 1/2-
13NC x 1-1/2 lg. capscrews with flatwashers, lockwashers and nuts, each side. Reattach vehicle tow
hooks to inside of bracket assembly (item #5&6) using (3) M12x1.75x65mm capscrews in place of
factory hardware. Reattach splashguard. Reattach blocker bar (see step 1). Tighten to full torque.
Winch frame omitted for clarity