Ramsey Winch DODGE QM KIT 251066 - Manual (Page 3)

KI-912594-1198-B 2
STEP 3
Remove (2) M12 bolts that attach bumper corner bracket to outside of vehicle frame (each side).
STEP 4
Remove lower body mount isolator located inside vehicle frame (each side).
Remove (3) M12 nuts (each side) which attach bumper hanger bracket to inner frame. Leave
bumper hanger bracket in place.
STEP 5
Install R.H. bracket assembly (item #1), to inside of frame, over (3) bolts on R.H. bumper hanger
bracket and secure using (3) M12 nuts. See VIEW A-A. DO NOT TIGHTEN HARDWARE
COMPLETELY
STEP 6
Install L.H. bracket assembly (item #2), to inside of frame, over (3) bolts on L.H. bumper hanger
bracket and secure using (3) M12 nuts. DO NOT TIGHTEN HARDWARE COMPLETELY.