Ramsey Winch CHEVY QM KIT 251067 - Manual (Page 3)

KI-912595-0899-B 3
Align frame mounting bracket (item #1 & #2) with underside of vehicle frame, slide tow hook bolt
back into place and secure with nut. Make sure that tab on bracket is to the inside edge of frame.
Replace lower bolt. DO NOT TIGHTEN HARDWARE COMPLETELY.
STEP 4
Drill 17/32” hole in vehicle frame using rear hole in frame mounting bracket as a template as shown
below. Install ½” washer (item #6) and nut (item #5) through existing access hole in bottom of vehicle
frame. Using a standard combination wrench to hold the nut in place, thread ½”-13NC X 1”
capscrew (item #3) into washer and nut. DO NOT TIGHTEN HARDWARE COMPLETELY.
STEP 5