Ramsey Winch FORD QM KIT 251029 - Manual (Page 2)

1
INSTALLATION INSTRUCTIONS FOR
QM FRONT RECEIVER KIT #251029
1. Remove vehicle bumper from vehicle frame. Use a hammer to drive stud assembly from
slotted holes in bumper brackets, as shown in DETAIL A. A 3" section from center of air-
dam must be removed for clearance around receiver hitch.
2. Mount bumper and receiver (item #6) to vehicle frame. Use (2) 1/2-13NC x 1-1/2 Lg. Hx.
Hd. capscrews with flatwashers, lockwashers and nuts (each side). TIGHTEN
HARDWARE TO 74 FT./LB. (100 NM.) TORQUE.
REFER TO WINCH OWNER'S MANUAL FOR INSTALLATION INSTRUCTIONS AN ELECTRICAL CONNECTIONS.
PARTS LIST FOR QM FRONT RECEIVER KIT #251029
ITEM QTY. PART NO. DESCRIPTION
1 4 414548 CAPSCREW 1/2-13NC X 1-1/2 HX. HD., GR. 5
2 4 418069 NUT 1/2-13NC
3 4 418218 LOCKWASHER
4 4 418223 FLATWASHER
5 1 472032 RECEIVER COVER
6 1 530119 QM FRONT RECEIVER