Ramsey Winch FORD GRILL GUARD/WRAPAROUND KITS 295948 & 295949 - Manual (Page 2)

2
FOR ALL VEHICLES WITHOUT FRONT TOW HOOKS, START ON
THIS PAGE.
FOR ALL VEHICLES EQUIPPED WITH FRONT TOW HOOKS,
START ON FOLLOWING PAGE.
Cut 2 L-shaped slots 4” x 3” 28-1/4” apart, centered on the vehicle
(in the bumper cavities), as shown at right. The right and left lower
mounting brackets will need to be inserted through these slots, so
use the lower mounts as guides to cut slots.
Insert (2 per side) 7/16 bolts with extension rods (item #9) through
holes in frame rail so that bolts come through bottom of frame rail,
as shown at right. Once bolts extend through bottom of frame rail,
fasten lower mounting bracket (item #3) using (2 per side) 7/16 flat
washers (item #14) and (2 per side) 7/16 lock nuts (item #15). Do
not tighten until later.
Do the same on the right side of vehicle.
Continue with installation on Page 4.