Ramsey Winch CHEVY GRILL GUARD KIT 295928 - Manual (Page 4)

KI-913363-0501-A 3
FURNISHED WITH WINCH
Figure 5
Step 6
Note: You will need assistance for this step.
Have someone hold the center unit while you insert the
winch mounting channel #2 between side plates of center
unit #5. Channel shims #29 are inserted between the end of
the channel and the side plate of the center unit on both
sides. Secure each side of channel using (2) 3/8-16NC x 1-
1/4 capscrews #16 with nuts #20 (Figure 5). Tighten
hardware to proper torque. (See torque value chart, page 8).
Step 7
Mount center unit on vehicle and secure each side at the lower support bracket using (3) 1/2” X 1-1/4”
capscrews #17 with (3) 1/2” nuts #21 (Figure 6). Attach each side of center unit to upper support
bracket using (1) 3/8-16NC x 1-1/4 capscrew #16 with nut #20.
DO NOT TIGHTEN HARDWARE.
Step 8
Install fairlead as shown below. Note that top holes in channel (Figure 7) align with bottom holes on
roller fairlead (Figure 8). Secure using capscrew, lockwasher, and nut furnished with winch.
Figure 7
Figure 8
FURNISHED WITH WINCH FURNISHED WITH WINCH
Figure 6