Ramsey Winch CHEVY GRILL GUARD KIT 295921 - Manual (Page 2)

1
Step 1
Note: It is not necessary to remove or modify the vehicle bumper to install this mounting kit. Remove
the M12 nut to the cross bolt on the tow hook and slide the bolt back. Remove lower M12 bolt for tow
hook on bottom of vehicle frame. It is not necessary to remove the tow hook.
Step 2
Align R.H. frame mounting bracket #4 with underside of vehicle frame (Figure 3), slide tow hook bolt
back into place and secure with M12 nut (Figure 4). Make sure that tab on bracket is to the inside
edge of frame. Replace lower M12 mounting bolt (Figure 5).
DO NOT TIGHTEN HARDWARE
COMPLETELY.
Figure 1 Figure 2
Figure 4 Figure 5
Figure 3
4