Ramsey Winch CHEVY GRILL GUARD KIT 295367 (RE WINCH) - Manual (Page 4)

3
Figure 6
3 26
15
Step 7
Install upper tube assembly #3 between side plates #1. Insert (1)
shim #26 between tube and side plate at each end. Secure
using (1) 3/8-16NC x 3/4” hex socket button head capscrew #15
through side plate and into threaded hole in each end of tube
(Figure 6). Repeat for other tube.
TIGHTEN ALL HARDWARE
COMPLETELY. Start at the upper tube assembly and work down to
the lower bracket assemblies tightening all hardware to the
appropriate torque value.
(See Torque Value Chart on page 5).
Step 8
Install fairlead as shown below. Note that top holes in channel (Figure 7) align with bottom holes on
roller fairlead. Secure using capscrews, lockwashers, and nuts furnished with winch.
Figure 7