Aiwa CDC-MP3 - Manual (Page 10)

tousi-E-10
Activating the timer
You can activate the timer for program 1 and/or
program 2.
1
With the unit on, press INFO.
The “PRG1 ON” or “PRG1 OFF” indication
(the current setting for program 1) appears.
2
Press TUNE i or TUNE k repeatedly
until the “PRG1 ON” indication flashes.
3
Press INFO.
The “PRG2 ON” or “PRG2 OFF” indication
(the current setting for program 2) appears.
4
Press TUNE i or TUNE k repeatedly
until the “PRG2 ON” indication flashes.
5
Press INFO to activate the timer.
The “MY INFO” indicator lights up.
If you do not proceed to the next step within 5
seconds in steps 1 – 4, the display returns to the
current source indication.
To cancel the timer
To cancel program 1, press INFO, then press
TUNE
i or TUNE k repeatedly until the “PRG1
OFF” indication flashes in step 2.
To cancel program 2, press INFO, then press
TUNE
i or TUNE k repeatedly until the “PRG2
OFF” indication flashes in step 4.
9
ENGLISH
MY INFORMATION SWITCH
Notes
• When you preset two programs, be sure that
they do not overlap.
• Even if the unit is in a mode other than Radio
mode, the unit switches to Radio mode and
tunes in the preset radio program at the preset
time automatically. When the program is over,
the unit returns to the former mode automatically.
• When this function is activated, TUNE i / k ,
A.ME/PS, LO, INFO, and the preset number
buttons do not work for tuning in stations.
• Even if the unit is turned off and on, or the front
panel is detached and attached, this function is
active until turn-off time.
• Even if you are listening to a radio program with
this function, pressing FUNCTION switches the
unit to another mode. If you switch modes with
FUNCTION, the unit does not turn off at the turn-
off time of the timer.
01_CDCMP3(YU)E 00.11.22, 11:40 AM 10