Ramsey Winch ON OFF SWITCH KIT 282053 - Manual (Page 2)

KI-912208-1199-B 1
Step 1
1) Open hood of vehicle. Find adequate location, near battery, to mount switch #1. (Figure 1).
1) Use mounting bracket #3 as a guide to mark location of holes needed to mount switch.
2) Drill (2) 5/16” holes where marked.
Step 2
1) Install (2) 1/4-20NC X 3/4” black socket button head capscrews #5 through the switch. Place
flatwasher #10 on capscrew closest to the “OFF” position, and slip loop of lanyard over capscrew
closest to the “ON” position as shown (Figure 2).
2) Install switch #1 on bracket #3 and secure each side using black lockwasher #8 and nut #7.
Tighten to 80 in-lbs.
Step 3
1) Attach wire assembly #2 to one of the switch terminals. Secure using lockwasher and nut as
shown (Figure 3). Attach red power lead from winch to remaining switch terminal. Secure using
lockwasher and nut. Tighten securely.
Figure 1
Figure 3
Figure 2