Ramsey Winch RPH-20000 (QUANTUM GBX) - Manual (Page 8)

6
3. Remove brake assembly (item #31) by removing (2) mounting screws (item #21) attaching brake
to end bearing (item #8). Remove coupling (item #5) and gasket (item #34) from end bearing.
Take note of mounting configuration for proper mounting of parts during re-assembly.
4. Remove winch from upright mounting frame (item #1) by removing (4) capscrews and
lockwashers. Pull motor end bearing (item #8) from drum assembly (item #2).
34
10
5
8
21
31
24 17
1
17 24
18 24
9
2
18 24
8