Ramsey Winch SYNTHETIC ROPE KIT 251262 - Manual (Page 3)

Installation
Notes:
· Rope should be installed so that it feeds from the bottom of the drum.
· An Aluminum Hawse Fairlead, P/N 251266, is recommended for use with
the Ramsey Synthetic Rope.
· Before installing synthetic rope, inspect winch drum and smooth any
sharp edges on drum barrel, flanges and other winch accessories that
may contact the rope.
· The rope anchor requires a 13/64” thru hole or 1/4” tapped hole in the
drum flange located 5/8±1/32” from drum barrel.
1. Unwind new rope by rolling it out along the ground.
2. Remove steel cable and cable anchor from winch. Retain cable and cable
anchor for future use, unless damaged.
3