Poly-Tex KOOL MART with Roll-up sides - Manual (Page 6)

20'-0"
REV: AD-130315
20'-0"
To assemble the base, connect corner bases, six foot
side bases, and twelve foot side bases to length of
greenhouse. These are secured together with snap
buttons incorporated with the part.
Note: Not all KOOL MART's will contain a 6' base.
SNAP BUTTON
When measuring the width of the greenhouse, measure
from center-to-center of 5" inserts. The width should be
20'. Also measure diagonally across the base from
corner-to-corner to make sure that the base is square.
After you have assembled and squared the entire base
of the KOOL MART, drive one 18" spike through the
hole in each plate that accompanies the 5" insert.
CENTER OF 5" INSERT
18" SPIKE
BMS1130
20'-0"
BASE ASSEMBLY SQUARE THE BASE FINAL BASE ASSEMBLY
KHR1014
6' SIDE BASE (OPTIONAL)
KHR1012
LEFT CORNER
BASE
KHR1016
12' SIDE BASE
KHR1016
KHR1010
RIGHT
CORNER
BASE