Poly-Tex KOOL MART with Roll-up sides User Manual

Page 11

KOOL MART WITH ROLL-UP SIDES

1. Install the "V" brackets onto the center poles and intermediate

frame sections by inserting them into the pre-drilled holes.

2. Attach Inline fitting to power pole at appoximately 84". Attach

purlin to inline fitting and hoop tabs and adjust if necessary.

3. Install the basket purlin by hooking it on the basket purlin hooks.

4. Place bench tops on "V" brackets as shown.

5. Use flat stacker clips to secure bench tops to "V" brackets on

each end of the four center benches using thumb screws.
See Page 9 for preferred ballast installation, and page 10 for
alternate Water tube installation.

BMS1120

V-BRACKET

KHR1048 V-BRACKET

W/BASKET PURLIN HOOKS

BASKET
PURLIN
HOOK

BASKET

PURLIN

HOOK

GM4000 PURLIN

5/16" X 1 1/4"

CARRIAGE BOLT,

LOCK WASHER,

& HEX NUT

INLINE FITTING

5/16" X 1 1/4"
CARRIAGE BOLT,

LOCK WASHER

& HEX NUT

APPROXIMATELY

84"

KM2015
KM BENCH FRAME

KM2003

V-BRACKET

KM2003

V-BRACKET

KM2015

KM BENCH FRAME

BMS1121

V BRACKET

PLACING BENCH TOPS

BASKET PURLIN

GM4000

BENCH TOP

FLAT STACKER CLIP

THUMB SCREW