Otter Outdoors Wild Bench Seat (For 2036,2026,2046 Wild T600 Packages) - Manual (Page 3)

4. Install end caps into the ends of the straight bars and the curved bars.
5. Attach the bench assembly to the hinge brackets that were mounted on the sled in
step 3. Due to variations in the molding process some sleds may need to be stretched to
make the bench support bars fit. Install the support bar in the bracket at the front of the
sled and push out the back of the sled until the bar will fit into the bracket. It is easier to
do this if the sled is at room temperature as the plastic is more flexible when it is warm.