Otter Outdoors Pro Ice Resort - Manual (Page 6)

Page 6
19
9
12
Note:
Use a light oil
such as WD-40 to
lubricate the poles to help
them slide easier. Wipe
off any excess. Silicone
may be substituted but is
not as effective.
22
14
22
22
22
Note:
Predrilling a
3/32” hole will make
installation of
screws easier.
18
16
Button
lock
10. Assemble Bottom Main Frame Bar: Insert the outer main frame bar (Item 12) into the middle main frame bar
(Item 14). Fasten with self-tapping screw (Item 17). Slide the sleeve (Item 16) over the main frame extension bar
(Item 9). (Line up holes with button lock, press lock in as you slide over the bar). Insert the black plug
(Item 18) into the main frame extension bar (Item 9). Insert outer main frame bar (Item 12) into sleeve (Item 16).
Cover end of main frame extension bar (Item 9) with black end cap (Item 19). Ref. Diagram 7.
Diagram 7
9
12
11. Attach Bottom main frame assembly (Assembled in Step 8) onto frame brackets (Item 3 and 4). Secure with 1/4
nylon hex lock nut (Item 21). Ref. Diagram 8.
4
3
3
Diagram 8
21
Bottom Main Frame Assembly