Otter Outdoors XT 650 Cabin - Manual (Page 8)

Page 8
15. On the front of the fishhouse, start in the corners and work inward, snap the plastic trim seal on the canvas tent
(Item 2) to the top edge of the sled (Item 1) Ref. Diagram 13.
Diagram 13
Start here and
work inward
Back
Left Side
Front
Right Side
16. The tent (Item 2) will meet in the middle and should be free to open and close so it can be removed.
General Note: Be careful with tent windows in cold weather, as creasing or crushing them will cause
breakage.
Caution: Use adequate ventilation. Portable heaters use up oxygen
and emit carbon monoxide. Use reflectors and identifying lights after
dark or during limited visibility.
ƽ
Start Here and
work inward
2
1
To Collapse Tent and Transport:
1. Remove support bars and store inside the sled.
2. Retract main frame bars by pressing in button while
sliding the bar farther into the tube.
3. Fold the tent in towards the sled so all the bars are
laying on top of the sled.
4. Tuck in excess tent material.
5. Ready for transport.
6. Reverse to set up the fishhouse again.
Fold tent inward
towards sled.
Velcro attaches
at this point