Maintenance, Gun handle disassembly – Lincoln Electric IMT10097 POWER MIG 216 User Manual

Page 24

D-3

MAINTENANCE

GUN HANDLE DISASSEMBLY

The internal parts of the gun handle may be
inspected or serviced if necessary.

The gun handle consists of two halves that are
held together with a collar on each end. To
open up the handle, turn the collars approxi-
mately 60 degrees counterclockwise (the same
direction as removing a right hand thread) until
the collar reaches a stop. Then pull the collar
off the gun handle. If the collars are difficult to
turn, position the gun handle against a corner,
place a screwdriver against the tab on the col-
lar and give the screwdriver a sharp blow to
turn the collar past an internal locking rib.

Counterclockwise

„

English

Metric

Description

Part No.

Size

CABLE LINER
For 15' (4.5 m) or KP42-25-15

.025" – .030"

0.6 – 0.8 mm

shorter Cable KP42-4045-15

.035" – .045"

0.9 – 1.1 mm

KP42-4045-15

3/64"

1.2 mm

(Alum. wire)

CONTACT TIPS
Standard Duty KP2744-025

.025"

0.6 mm

KP2744-030

.030"

0.8 mm

KP2744-035

.035"

0.9 mm

KP2744-045

.045"

1.1 mm

Tapered KP2744-030T

.030"

0.8 mm

KP2744-035T

.035"

0.9 mm

KP2744-045T

.045"

1.1 mm

Tab (For Aluminum) KP2744-364A

3/64"

1.2 mm

(Alum. Wire)

GAS NOZZLES
Fixed (Flush)

KP2742-1-38F

3/8"

9.5 mm

KP2742-1-50F*

1/2"

12.7 mm

KP2742-1-62F

5/8"

15.9 mm

Fixed

(Recessed)

KP2742-1-38R

3/8"

9.5 mm

KP2742-1-50R

1/2"

12.7 mm

KP2742-1-62R

5/8"

15.9 mm

Requires: Gas
Diffuser As'bly

KP2746 *

.025" – .045"

0.6 – 1.1 mm

Insulator

KP2773-2 *

GUN TUBE ASSEMBLIES

Standard (60°)

KP3078-60 *

45°

KP3078-45 *

TABLE D.2

ACCESSORIES AND EXPENDABLE REPLACEMENT PARTS

FOR MAGNUM PRO 250L GUN AND CABLE ASSEMBLIES

Included with POWER MIG® 216

** Tapered tips are required with 3/8” I.D. and 1/2” I.D. Nozzles.

See www.lincolnelectric.com for complete offering of Magnum Pro consumables.

POWER MIG® 216