Lincoln Electric IM10003 VANTAGE 500-I - Manual (Page 37)

F-2 DIAGRAMS F-2
VANTAGE® 500-I
M22156
Sales and Service through Subsidiaries and Distributors Worldwide
Cleveland, Ohio 44117-1199 U.S.A.
R
THE LINCOLN ELECTRIC COMPANY
World's Leader in Welding and Cutting Products
A
4. ROUTE LEADS 3C & 6D THROUGH RCD OPENING AS SHOWN
(SEE FIGURE 2). CUT BOTH LEADS AS SHOWN.
5. STRIP ALL FOUR LEADS 13MM (.50”).
6. CONNECT LEADS FROM CIRCUIT BREAKERS TO RCD AS SHOWN
(SEE FIGURE 3). NOTE LEAD CONFIGURATION.
7. TIGHTEN LEADS TO 2.4NM (21 IN. LBS.) MOUNT RCD TO PANEL USING
MOUNTING BRACKET AND SCREWS SET ASIDE IN STEP 3.
8. SECURE UPPER CONTROL PANEL IN PLACE.
9. RECONNECT NEGATIVE BATTERY CABLE.
THE UNIT IS NOW READY FOR OPERATION
CIRCUIT BREAKERS
3C
6D
6D
3C
FIGURE 2
FIGURE 3
RCD OPENING
CUT LEAD
RCD
3C
6D
3C
6D