Lift capacity, Improper hydraulic pump repair or replace pump, Operation – Alamo 1595 User Manual

Page 87: A seal repair kit. see “cylinder service, Improper hydraulic valve repair or replace valve, Bucket rides on wear runners, Opera t ion

OPERATION

1595 01/11

Operation Section 4-43

OPERA

ION

TROUBLE

POSSIBLE CAUSE

POSSIBLE REMEDY

Insufficient lift capacity

Load is greater than boom

Check loader specifications.

lift capacity.
Improper hydraulic pump

Repair or replace pump.

operation.
Internal lift cylinder leakage.

Replace any worn parts and install
a seal repair kit. See “Cylinder
Service”.

Improper hydraulic valve

Repair or replace valve.
operation.

Excessive wear on

Bucket is riding on cutting

Use boom “FLOAT” position or

cutting edge

edge instead of wear runners.

bucket level indicator to ensure

bucket rides on wear runners.

Bucket cutting edge

Rear axle on tractor not level

With tractor on level surface,

not flat on the ground.

from side to side.

compare rear axle height from left
to right, measuring from axle center
to ground. Adjust air pressure in rear
tires until axle height measures the
same for both sides.