AT&T 1040 - Manual (Page 42)

36
One-touch setup and operation
One-touch storage
1. Press [ENTER]. The screen displays ONE TOUCH.
2. Press [ENTER].
3. Press [ ] or [ ] repeatedly until you see
PROGRAM.
4. Press [ENTER]. The screen includes (ENTER
NUMBER).
5. Use the dial pad to enter up to 24 digits.
-OR-
• To copy the most recently dialed number
from redial, press
[(AUTO) REDIAL]. Only the
last number dialed from this extension can
be copied to a one-touch location. The other
numbers on the redial list cannot be copied.
• If you need to store a two-second dialing
pause for accessing banking or long distance
services, press
[ ] or [ ], scroll to PAUSE,
then press [ENTER]. A P will appear on the
screen.
• If you need to store a signal for switching to
temporary tone dialing, press
[ ] or [ ] until
you see TONE, then press [ENTER]. A T will
appear on the screen.
• If you need to store a flash signal for
using the service supplied by your telephone
company, press
[ ] or [ ] until you see
FLASH, then press [ENTER]. An F will appear
on the screen.
• To erase the last digit, press [ ] to scroll to
DELETE CHAR then press [ENTER].
• To cancel programming, scroll to CANCEL
and then press
[ENTER].
continued on next page
PROGRAM
(ENTER NUMBER)
PAUSE