Intercom – AT&T 1040 User Manual

Page 33

Intercom operation

Intercom

Make an intercom call with the speakerphone or
headset

With the handset in the telephone base:

1. If One-touch preference is set to

INTERCOM, skip

to step 2.

-OR-
If One-touch preference is set to

TELEPHONE,

press

[INTERCOM]. The phone will

automatically activate the intercom call in
the mode (headset or speakerphone) you
programmed (see

AUTOMATIC MODE on page

39 of the installation guide).

2. Press the one-touch button

. The screen will

display

INTERCOM TO XX, with XX being the

destination extension.

If the extension is idle or set to Do

Not Disturb,

you will hear long beeps. If the other extension is
busy, you will hear a busy signal.

NOTE:

The intercom call is automatically can-

celed if you do not press a one-touch button with-
in 10 seconds.

10:01AM 11/23
EXT 11
INTERCOM TO
PAGE

10:01AM 11/23
EXT 11
INTERCOM TO 12