AT&T 1040 - Manual (Page 32)

26
Intercom operation
Intercom
Use this feature for calls between system phones.
Make an intercom call with the handset
1. If One-touch preference is set to INTERCOM
(page 35), skip to step 2.
-OR-
If One-touch preference is set to
TELEPHONE
(page 35), press [INTERCOM].
2. Press the one-touch button for the destination
party, then lift the handset. The screen will
display
INTERCOM TO XX, with XX being the
destination extension number.
If the extension you called is idle or set to Do
Not Disturb, you will hear long beeps. If the other
extension is on a call, you will hear a busy signal.
NOTE: The intercom call is automatically can-
celed if you do not press a one-touch button with-
in 10 seconds.
10:01AM 11/23
EXT 11
INTERCOM TO
PAGE
10:01AM 11/23
EXT 11
INTERCOM TO 12