Warning – Lincoln Electric IM10146 MARQUETTE AUTO-DARKENING HELMET User Manual
Page 2
2345 Murphy Blvd. Gainesville, GA 30504 TEL: 866-236-0044
MARQUETTE AUTO-DARKENING HELMET
OPERATORʼS MANUAL
IM10146
November, 2012
TABLE OF CONTENTS
Page
SAFETY WARNINGS – READ BEFORE USING
1
HELMET INFORMATION, SPECIFICATIONS
2
OPERATING INSTRUCTIONS
3
CARTRIDGE OPERATIONS/FEATURES
3
SHADE GUIDE SETTINGS
4
HELMET CARE AND MAINTENANCE
5
TROUBLE SHOOTING
6
PARTS LISTS, WARRANTY INFORMATION
7
SAFETY WARNINGS – READ BEFORE USING
ARC Rays can injure eyes and burn skin
• Before welding, always inspect helmet and filter lens to be sure they are fitted
properly, in good condition and not damaged.
• Check to see that the clear lens is clean and securely attached to the helmet.
• Always wear safety glasses or goggles under the welding helmet and protective
clothing to protect your skin from radiation, burns and spatter.
• Ensure that optical radiation from other welderʼs arcs in the immediate area
does not enter in from behind the helmet and auto-darkening filter.
Note: Auto-darkening filters in Marquette
®
helmets are designed to protect the user against
harmful ultra-violet and infrared rays both in the dark and light states. No matter what shade the
filter is set to, the UV/IR protection is always present.
FUMES AND GASES can be dangerous to your health.
• Keep your head out of fumes.
• Use enough ventilation or exhaust at the arc or both to keep fumes and gases
from your breathing zone and general area.
• When welding with electrodes which require special ventilation such as
stainless or hard facing (see instructions on container or MSDS) or on
lead or cadmium plated steel and other metals or coatings which produce
highly toxic fumes, keep exposure as low as possible and within applica-
ble OSHA PEL and ACGIH TLV limits using local exhaust or mechanical
ventilation. In confined spaces or in some circumstances, outdoors, a
respirator may be required. Additional precautions are also required
when welding on galvanized steel.
1
WARNING
®
Refer to http://www.lincolnelectric.com/safety
for additional safety information.