beautypg.com

Lincoln Electric IM10068 CENTURY AUTO-DARKENING HELMET User Manual

Warning, Century auto-darkening helmet, Safety warnings – read before using

background image

• Century

®

Equipment

2345 Murphy Blvd. Gainesville, GA 30504 TEL: 866-236-0044

Web Site: www.centuryequipment.net

CENTURY AUTO-DARKENING HELMET

OPERATOR’S MANUAL

IM10068

April, 2010

Copyright © Lincoln Global Inc.

TABLE OF CONTENTS

Page

SAFETY WARNINGS – READ BEFORE USING

1

HELMET INFORMATION, SPECIFICATIONS

2

OPERATING INSTRUCTIONS

3

CARTRIDGE OPERATIONS/FEATURES

3

SHADE GUIDE SETTINGS

4

HELMET CARE AND MAINTENANCE

5

TROUBLE SHOOTING

6

PARTS LISTS, WARRANTY INFORMATION

7

SAFETY WARNINGS – READ BEFORE USING

ARC Rays can injure eyes and burn skin
• Before welding, always inspect helmet and filter lens to be sure they are fitted

properly, in good condition and not damaged.

• Check to see that the clear lens is clean and securely attached to the helmet.
• Always wear safety glasses or goggles under the welding helmet and protective

clothing to protect your skin from radiation, burns and spatter.

• Ensure that optical radiation from other welder’s arcs in the immediate area

does not enter in from behind the helmet and auto-darkening filter.

Note: Auto-darkening filters in Century

®

helmets are designed to protect the user against harm-

ful ultra-violet and infrared rays both in the dark and light states. No matter what shade the filter
is set to, the UV/IR protection is always present.

FUMES AND GASES can be dangerous to your health.
• Keep your head out of fumes.
• Use enough ventilation or exhaust at the arc or both to keep fumes and gases

from your breathing zone and general area.

• When welding with electrodes which require special ventilation such as

stainless or hard facing (see instructions on container or MSDS) or on
lead or cadmium plated steel and other metals or coatings which produce
highly toxic fumes, keep exposure as low as possible and within applica-
ble OSHA PEL and ACGIH TLV limits using local exhaust or mechanical
ventilation. In confined spaces or in some circumstances, outdoors, a
respirator may be required. Additional precautions are also required
when welding on galvanized steel.

1

WARNING

®

Refer to http://www.lincolnelectric.com/safety

for additional safety information.

RETURN TO MAIN MENU