Lincoln Electric IM10103 AIR VANTAGE 700 (AU) - Manual (Page 11)

AIR VANTAGE ® 700 (Au) CuMMINS
A-1 INSTALLATION A-1
TEChNICAL SPECIFICATIONS - AIR VANTAGE ® 700 (Au) CuMMINS (K2961-2)
Make/Model Description Speed (RPM) Displacement Starting Dry Capacities
cu. in. (ltrs.) System
4 cylinder High Idle 1860 199(3.3) 12VDC Battery & Fuel: 25 gal.
Cummins ® 69 HP (51.4kw) starter (94.6 L)
B3.3T 1800 RPM Full Load 1860 Bore x Stroke inch (mm) Oil: 2 gal. (7.6L)
Turbo Charged
Diesel Engine
Low Idle 1500 3.74 X 4.53 Radiator Coolant:
(95 x 115mm) 4.0gal. (15.1L)
INPuT - DIESEL ENGINE
RATED OuTPuT @ 104°F(40°C) - WELDER
Duty Cycle Welding Output Volts at Rated Amps
100% 600 Amps (DC multi-purpose) 44 Volts
60% 650 Amps (DC multi-purpose) 40 volts
40% 700 Amps (DC multi-purpose) 38 volts
PhYSICAL DIMENSIONS
height (2) Width (3) Depth Weight
36.9 in 28.5 in. 77.0 in. 2018 lbs.
(937 mm) (724 mm) (1956 mm) (915 kg)
(Approx.)
Lift bail weight rating 2500 lbs. (1134 kg.) Maximum.
(1) Output rating in watts is equivalent to volt-amperes at unity power factor.
Output voltage is within +/- 10% at all loads up to rated capacity. When welding, available auxiliary power will be reduced.
(2) Top of Enclosure, add 8.3” (211mm) for exhaust pipe, also add 3.65”(93mm) for metal skid.
(3) Without metal skid.
OuTPuT @ 104°F(40°C) - WELDER AND GENERATOR
Welding Range
30 - 700 Amps CC/CV
20 - 250 Amps TIG
Open Circuit Voltage
60 Max OCV @ 1860 RPM
Auxiliary Power (1)
240 VAC 2 x 3600 WATTS, 60 Hz., Single Phase
415 VAC 20,000 WATTS, 60 Hz., Three Phase
Compressor Model Description Delivery Maximum System Compressor Capacities
Pressure Protection
VMAC ® Belt-Drive Rotary High Idle Mode: 150 PSI Safety Relief Valve 1.3 gal.(5.0 ltrs)
S700159 Screw Air Compressor 60 SCFM @ 100PSI (10.5 kg/cm 2 ) 200 PSI
(28.3 Ltr/sec. @ (14.1 kg/cm 2 )
7.0 kg/cm)
High Temperature
Automatic Shutdown
290° F (143°C)
COMPRESSOR SPECIFICATIONS