AT&T 900 MHz - Manual (Page 17)

5 To record a Caller Specific Outgoing
Announcement, select
OUTGOING
— OR —
To record a Talking Caller ID
Announcement, select
LOCAL.
6 Select ADD. The screen displays ENTER
NUMBER:.
7 Use the keypad to enter the digits (up to
24) of the incoming phone number, then
select
DONE
— OR —
Press >, then select
DONE to match
incoming PRIVATE CALL information
— OR —
Press > >, then select
DONE to match
UNKNOWN CALL information.
8 Select RECORD.
9 Using the handset, record an
announcement.
10 Select STOP when you are finished
recording. The system plays the
announcement you just recorded.
11 The screen displays the number or call
type matched to this announcement. To
change the recording, select
RE-RECORD
— OR —
Select
DONE. If you have not recorded all
announcements, begin again at Step 5.
FEATURE SETUP
16
5550123
RECORD
RECORDING...
STOP
5550123
RE-RECORD DONE
LOCAL
REVIEW ADD
ENTER NUMBER:
DONE
ANNOUNCEMENTS
OUTGOING LOCAL
— OR —