11 bottom panel connectors, 1 lan connection, Ottom – IEI Integration AFL-4 series-N270 v2.11 User Manual

Page 68: Anel, Onnectors

AFL-4 Series-N270 User Manual

Page 68

Step 3:

Align the retention screw holes on the mounting arm interface with those in the

flat panel PC. The arm mount retention screw holes are shown in Figure 4-26.

Figure 4-26: AFL-412A-N270 Arm Mounting Retention Screw Holes

Step 4:

Secure the flat panel PC to the interface pad by inserting four retention screws

through the bottom of the mounting arm interface pad and into the flat panel PC.

Step 0:

4.11 Bottom Panel Connectors

4.11.1 LAN Connection

There is one external RJ-45 LAN connector. The RJ-45 connector enables connection to

an external network. To connect a LAN cable with an RJ-45 connector, please follow the

instructions below.

Step 1:

Locate the RJ-45 connector on the bottom panel of the AFL-4 Series-N270

Series.