3 motherboard components, 1 memory support, 1 additional memory – IEI Integration AFL-4 series-N270 v2.11 User Manual
Page 29: 2 storage capacity, Otherboard, Omponents
AFL-4 Series-N270 User Manual
Page 29
Intel® Streaming SIMD Extensions-2 and -3 (Intel® SSE2 and Intel® SSE3)
support and Supplemental Streaming SIMD Extension 3 (SSSE3) support
Micro-FCBGA8 packaging technologies
Thermal management support via Intel® Thermal Monitor 1 and Intel Thermal
Monitor 2
FSB Lane Reversal for flexible routing
Supports
C0/C1(e)/C2(e)/C4(e)
L2 Dynamic Cache Sizing
Advanced power management features including Enhanced Intel
SpeedStep® Technology
Execute Disable Bit support for enhanced security
2.3 Motherboard Components
The following sections describe features on the motherboard.
2.3.1 Memory Support
One 200-pin 1.0 GB 533 MHz DDR2 SDRAM SO-DIMM is installed in the AFL-4
Series-N270 and controlled by the Intel® 945GSE GMCH installed on the internal
motherboard.
2.3.1.1 Additional Memory
The Intel® 945GSE is capable of supporting one 200-pin 2.0 GB (max.) 533 MHz or 400
MHz DDR2 SDRAM SO-DIMM. If additional memory is required, please contact an IEI
sales representative and discuss the necessary system requirement.
2.3.2 Storage Capacity
The AFL-4 Series-N270 supports an easily installed CompactFlash® Type II (CF Type II)
memory disk. The AFL-412A, AFL-415A, and AFL-415AE-N270 models can also support
either an internal 2.5” SATA hard disk drive or a HSDPA module.