Technical specifications – American Audio Q-3433 User Manual
Page 20
©
American Audio
®
- www.americanaudio.us - Q-3433 MKII User Instructions page 20
TECHNICAL SPECIFICATIONS
Model: Q-3433 MKII 4 Channel Mixer
POWER SUPPLY:
AC 115v~60Hz/230v50~60Hz, User Selectable
DIMENSIONS:
482mm (W) x 265.9mm (D) x 97.8mm (H)
WEIGHT:
9.47 Lbs. / 4.3Kgs.
CROSSFADER:
Feather Fader Plus - VCA detecting fader start control -
Low grounding impedance crossfader
POWER CONSUMPTION:
12W typical, 20W w/ full headphone output
HEADPHONE IMPEDANCE: 16 Ohms
OPERATING TEMPERATURE: 5 to 35 deg. C; Humidity: 25 to 85% RH
(non-condensing); Storage Temperature: -20 to 60 deg. C
Input Sensitivity (Level/Impedence): Note: 0dBV output, load = 100K OHM
LINE, AUX:
10K OHM / -14dBV (200mV) +/-2dB
PHONO:
47K OHM / -54dBV (2mV) +/-2dB
MICROPHONE 1,3:
2.2K OHM / -54dBV (2mV) +/-2dB
MICROPHONE 2: 1K OHM / -60dBV (1mV) +/-2dB
Output Sensitivity (Level/Impedence): Note: 0dBV=1Vrms
MASTER:
300 OHM
MASTER OUT (XLR):
600 OHM / 2.21dBV (1V) +/-2dB
ZONE:
1K OHM / 0dBV (1V) +/-2dB
REC OUT (RCA):
2.2K OHM / -10dBV (316mV) +/-2dB
PHONES: (LOAD=32 OHMS)
33 OHM / 0dBV (1V) +/-2dB
Maximum Output: (LOAD = 47K, THD = 1%)
MASTER/ZONE:
MORE THAN +18 dBV (8.0V)
PHONES: (LOAD=32 ohms)
MORE THAN +4dBV (1.6V)
CHANNEL BALANCE: WITHIN 3dB
Frequency Response:
LINE/AUX:
20 - 20KHz + /-2dB
PHONO:
20 - 20KHz +2 /-3dB (RIAA)
MICROPHONE:
20 - 20KHz +2 /-3dB
Noise: (maximum output) JIS-A weighted
LINE/AUX:
LESS THAN -90dBV
PHONO:
LESS THAN -66dBV
MIC 1,3:
LESS THAN -64dBV
MIC 2:
LESS THAN -60dBV
THD - Total Harmonic Distortion: (MASTER = 0dBV OUTPUT, w/ 20KHz LPF):
LINE:
LESS THAN 0.02% 20 - 20KHz
CROSS TALK:
(MASTER = 0dBV OUTPUT)
LINE:
MORE THAN 60dB AT 1KHz BETWEEN L AND R (Assign Off)
Channel Equalizer:
BASS:
+12 +/-2dB at 70Hz,
BELOW -27dB at 70Hz
MID:
+12 +/-2dB at 1KHz,
BELOW -27 at 1KHz
TREBLE:
+12 +/-2dB at 13KHz,
-14 +/-3dB at 13KHz
Microphone Equalizer:
BASS:
+12 +/-3dB at 100Hz, -22+/-3dB at 100Hz
TREBLE:
+12 +/-3dB at 10KHz, -15 +/-3dB at 10KHz
TALKOVER:
- 14 dB +/- 2dB
PHONES BASS CUT:
- 6dB +/-1.5dB at 100KHz