1 lan connection, 2 ps/2 y-cable connection – IEI Integration PICOe-PV-D4251_N4551_D5251 v1.00 User Manual
Page 75

PICOe-PV-D4251/N4551/D5251 User Manual
Page 61
4.8.1 LAN Connection
There are two external RJ-45 LAN connectors. The RJ-45 connectors enable connection
to an external network. To connect a LAN cable with an RJ-45 connector, please follow
the instructions below.
Step 1:
Locate the RJ-45 connectors. The locations of the USB connectors are shown
in Chapter 4.
Step 2:
Align the connectors. Align the RJ-45 connector on the LAN cable with one of
the RJ-45 connectors on the PICOe-PV-D4251/N4551/D5251. See
7
Figure 4-18.
Figure 4-18: LAN Connection
Step 3:
Insert the LAN cable RJ-45 connector. Once aligned, gently insert the LAN
cable RJ-45 connector into the onboard RJ-45 connector.
Step 0:
4.8.2 PS/2 Y-Cable Connection
The PICOe-PV-D4251/N4551/D5251 has a PS/2 connector on the external peripheral
interface panel. The dual PS/2 connector is connected to the PS/2 Y-cable that came with
the PICOe-PV-D4251/N4551/D5251. One of the PS/2 cables is connected to a keyboard
and the other to a mouse to the system. Follow the steps below to connect a keyboard and
mouse to the PICOe-PV-D4251/N4551/D5251.