5 parallel port cable without bracket – IEI Integration PICOe-PV-D4251_N4551_D5251 v1.00 User Manual

Page 71

PICOe-PV-D4251/N4551/D5251 User Manual

Page 57

Figure 4-14: Dual USB Cable Connection

Step 4:

Attach the bracket to the chassis. The USB 2.0 connectors are attached to a

bracket. To secure the bracket to the chassis please refer to the installation

instructions that came with the chassis.

Step 0:

4.7.5 Parallel Port Cable without Bracket

The optional parallel port (LPT) cable respectively connects the on-board LPT 26-pin box

header to an external LPT device (like a printer). The cable comprises a 26-pin female

header, to be connected to the on-board LPT box-header, on one side and on the other

side a standard external LPT connector. To connect the LPT cable, please follow the

steps below.

Step 1:

Locate the connector. The LPT connector location is shown in Chapter 4.

Step 2:

Align the connectors. Correctly align pin 1 on the cable connector with pin 1 on