3 7.1 channel audio kit installation – IEI Integration PICOe-945GSE User Manual

Page 95

PICOe-945GSE Half-Size CPU Card

Page 95

Figure 5-10: 5.1 Channel Audio Kit

Step 4:

Mount the audio kit onto the chassis. Once the audio kit is connected to the

PICOe-945GSE, secure the audio kit bracket to the system chassis.

Step 5:

Connect the audio devices. Connect one speaker to the line-in audio jack, one

speaker to the line-out audio jack and a microphone to the mic-in audio jack.

Step 6:

Install the driver. If the 5.1 channel audio kit is used, the ALC655 Realtek

codec driver must be installed. Refer to Chapter 7 for driver installation

instructions.

Step 0:

5.7.3 7.1 Channel Audio Kit Installation

NOTE:

This is an optional item that must be ordered separately. For further

information please contact the nearest PICOe-945GSE distributor,

reseller or vendor or contact an iEi sales representative directly. Send

any queries to

321H